Keysight FieldFox B Series User Manual page 42

Preparing for Initial Use of Your New FieldFox
Take the FieldFox Tour
Right Side Panel
Connector Description
Ethernet cable connector to read trace data using the FieldFox Data Link
Software and connect to the FieldFox remotely.
Download the latest version of the software at:
www.keysight.com/find/fieldfoxsupport
IF Out used in SA mode for external signal processing.
Frequency Reference Source Output
Trigger Output (ERTA mode).
Secure Digital slot. Use to extend the memory of the FieldFox.
The mini-USB port can be connected to your PC's standard USB port to
send SCPI commands.
Two standard USB connectors used to connect a power sensor for Power
Meter Mode. Also used to save files to a USB flash drive.
42
IMPORTANT! It is recommended that
only USB certified cables are used with
the FieldFox.
IMPORTANT! It is recommended that
only USB certified cables are used with
the FieldFox.
Learn More:
"LAN Settings" on
page 793
"IF Output" on
page 188
Chapter 26, "ERTA
(Extended Range
Transmission Analysis)
Mode - Option 209", on
page 613
"Saving and Recalling
Files" on page 804
Chapter 33, "Using the
Mini-USB Port to send
SCPI Commands and
Queries", on page 821
"Saving and Recalling
Files" on page 804
Keysight N9938-90006 User's Guide