Keysight FieldFox B Series User Manual page 237

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
Figure 9-24 Example Editing and Adding a New X axis antenna is shown.
Editing Cable Correction Factors and Adding New Cable Factors
This section contains two procedures illustrating how to edit the Cable Factors
settings table values.
If New is selected under the X, Y, or Z Antenna or Cable softkey menu,
whatever antenna or cable factors that have been imported as the default
values and are displayed in the Settings table.
1. Selecting an cable softkey menu:
Keysight N9938-90006 User's Guide
c. Press Save Antenna
Saving Naming Options"
page 778.
For more information:
— See also "GNSS (GPS+) and GPS" on page
Press Scale/Amptd > More
menus:
to save your changes. See also
and then to "Alpha Numeric Editing" on
> Corrections then choose one of these softkey
Chapter , "File
784.
237