[Sysname] nqa template ftp ftptplt
[Sysname-nqatplt-ftp-ftptplt] vpn-instance vpn1
NQA server commands
IMPORTANT:
Configure the NQA server only for UDP jitter, TCP, UDP echo, and voice operations.
display nqa server
Use display nqa server status to display NQA server status.
Syntax
display nqa server
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display NQA server status.
<Sysname> display nqa server
nqa server is: enabled
tcp-connect:
IP Address
2.2.2.2
udp-echo:
IP Address
3.3.3.3
Table 12 Command output
Field
tcp-connect
udp-echo
IP Address
Port
Vpn-instance
Port
Vpn-instance
2000
-
Port
Vpn-instance
3000
vpn1
Description
Information about the TCP listening service on the NQA server.
Information about the UDP listening service on the NQA server.
IP address specified for the TCP/UDP listening service on the NQA server.
Port number specified for the TCP/UDP listening service on the NQA server.
VPN instance of which the MPLS L3VPN on the NQA server.
80