B. Select measurements.
The gray boxes indicate that
the measurement is being
made, but the results are not
being displayed.
These black boxes indicate
that adjacent channel leakage
ratio measurement results
are being displayed in the
lower measurement window,
and that waveform quality
measurement results are
being displayed in the upper
measurement window.
1. Press the
Measurement selection
2. Highlight a measurement and press the knob.
3. Repeat steps 1 and 2 to add measurements.
key.
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_gen_op_overview_make_meas.fm
Making Measurements on a Mobile in FDD Test Mode
2
1
415