Rfgenerator Subsystem; Description; Syntax Diagrams And Command Descriptions - Agilent Technologies 8960 Series Reference Manual

RFGenerator Subsystem

RFGenerator Subsystem

Description

The RFGenerator subsystem selects the RF generator output port on test sets equipped with both the RF
IN/OUT port and the RF OUT ONLY port. If the test set does not have the RF OUT ONLY port, an error
message is generated when attempting to switch output ports.
The RF OUT ONLY port may not be used with some test applications or lab applications. In that case, a
message is displayed that tells you that the port could not be switched.

Syntax Diagrams and Command Descriptions

"RFGenerator: OUTPut" on page 282
281
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_rfgenerator_description.fm