Agilent Technologies 8960 Series Reference Manual page 341

STATus:OPERation:NMRReady:<WCDMA | FDD> Register Bit Assignments
The STATus:OPERation:NMRReady:FDD register bits indicate when a measurement has been completed and
new measurement results are available.
Bit Binary
Number Weighting
15 32768
14 16384
13 8192
12 4096
11 2048
10 1024
9 512
8 256
7 128
6 64
5 32
4 16
3 8
2 4
Condition
Not Used. Defined by SCPI.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
WBERror New Measurement Result Ready
WCPower New Measurement Result Ready
WWQuality New Measurement Result
Ready.
WACLeakage New Measurement Result
Ready.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is a 1 if the measurement has been
completed and has produced new results.
This bit is a zero at power on, after a preset
and while a measurement is in Measuring
States. See
page
This bit is a 1 if the measurement has been
completed and has produced new results.
This bit is a zero at power on, after a preset
and while a measurement is in Measuring
States. See
page
This bit is a 1 if the measurement has been
completed and has produced new results.
This bit is a zero at power on, after a preset
and while a measurement is in Measuring
States. See
page
This bit is a 1 if the measurement has been
completed and has produced new results.
This bit is a zero at power on, after a preset
and while a measurement is in Measuring
States. See
page
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_status_operation.fm
Description
"Triggering of Measurements" on
148.
"Triggering of Measurements" on
148.
"Triggering of Measurements" on
148.
"Triggering of Measurements" on
148.
STATus:OPERation:
341