Agilent Technologies 8960 Series Reference Manual page 354

STATus:QUEStionable
STATus:QUEStionable:CALL:CDMA Condition Register Bit Assignment
The STATus:QUEStionable:CALL:CDMA registers will contain information about which event(s) occurred
during call processing that indicate what call processing procedure failed
Bit Binary
Number Weighting
15 32768
14 16384
13 8192
12 4096
11 2048
10 1024
9 512
8 256
7 128
6 64
5 32
4 16
3 8
2 4
1 2
0 1
Program Example - STATus:QUEStionable:CALL:CDMA Register Bit Assignment
OUTPUT 714;"STATUS:QUESTIONABLE:CALL:CDMA:EVENT?"
!Queries and clears the Questionable Call CDMA Event Register
OUTPUT 714;"STATUS:QUESTIONABLE:CALL:CDMA:CONDITION?"
!Queries and clears the Questionable Call CDMA Condition Register
OUTPUT 714;"STATUS:QUESTIONABLE:CALL:CDMA:ENABLE 1024"
!Sets the Questionable Call CDMA Enable Register for bit 10
OUTPUT 714;"STATUS:QUESTIONABLE:CALL:CDMA:NTRANSITION 2"
!Sets the Questionable Call CDMA Negative Transition Filter Register !for bit 1
OUTPUT 714;"STATUS:QUESTIONABLE:CALL:CDMA:PTRANSITION 2"
!Sets the Questionable Call CDMA Positive Transition Filter Registerfor bit 1
354
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_status_questionable.fm
Condition
Not Used. Defined by SCPI.
MUI Maskable Message.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Call drop timer timed out.
Service connect completion not
received.
Service Option or Radio
Configuration rejected by MS.
Traffic channel preamble not
received.
Extension Bit.
Description
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is a 1 after 250 consecutive bad frames are
counted indicating that the reverse link is lost
This bit is a 1 when the test set has not received a
message from the MS that it has completed the
change to a new Service Option or Radio
Configuration.
This bit is a 1 when the MS receives a Service Option
or a Radio Configuration that it does not support.
This bit is a 1 if no preamble was received from the
MS.
This bit is always 0.