Agilent Technologies 8960 Series Reference Manual page 191

CALL :FDDTest :TFCIndicator
"Diagram Conventions" on page 168
CALL:FDDTest:CCPChannel:PRIMary[:SLEVel]
Function Sets/queries the test mode power offset of the primary common control physical channel . This
command sets the power offset level and turns on the power offset.
Setting Range: -20.00 dB to 0 dB, 9.91 E+37
Resolution: 0.01
Query Range: -20.00 dB to 0 dB, 9.91 E+37
Resolution: 0.01
*RST Setting 9.91 E+37
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"CALL:FDDTEST:CCPCHANNEL:PRIMARY:SLEVEL" !Sets P-CCPCH test mode power offset.
CALL:FDDTest:CCPChannel:PRIMary:LEVel
Function Sets/queries the primary common control physical channel's test mode power offset. This
command sets the power offset level and turns on the power offset.
Setting Range: -20.00 dB to 0 dB, 9.91 E+37
Resolution: 0.01
Query Range: -20.00 dB to 0 dB, 9.91 E+37
Resolution: 0.01
*RST Setting 9.91 E+37
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"CALL:FDDTEST:CCPCHANNEL:PRIMARY:LEVEL -5"
<sp><hex string>
? (returns string)
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_call_fddtest.fm
CALL:FDDTest
191