Agilent Technologies 8960 Series Reference Manual page 504

Hide thumbs Also See for 8960 Series:

Table of Contents

Configuring the Test Set's GPIB

The GPIB address is an integer between 0 and 30. The test set comes with a default address of 14 and may be

set/queried using the SYSTem subsystem or manually through the system configuration screen by selecting

the parameter and changing the number with the knob or the keypad.

The GPIB address is a non-volatile parameter. The GPIB address is not affected by any reset operation and

can only be changed by direct access to the parameter itself.

Troubleshooting