Agilent Technologies 8960 Series Reference Manual page 195

CALL:FDDTest:PICHannel:LEVel
Function Sets/queries the page indicator channel's test mode power offset. This command sets the power
offset level and turns on the power offset.
Setting Range: -20.00 dB to 0 dB
Resolution: 0.01
Query Range: -20.00 dB to 0 dB
Resolution: 0.01
*RST Setting -8.3 dB
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"CALL:FDDTEST:CPICHANNEL:LEVEL -5"
CALL:FDDTest:PICHannel:STATe
Function Sets/queries the page indicator channel's state in test mode.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 1 (on)
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"CALL:FDDTEST:CPICHANNEL:STATE OFF"
CALL:FDDTest:TFCIndicator
Function Sets/queries the transport format combination indicator (TFCI). The TFCI is a hexadecimal
string of up to 12 characters. An error message is displayed if the user attempts to enter more
characters than fit into the string.
Setting Range: 0x000 to 0x3FF
Query Range: 0x000 to 0x3FF
*RST Setting 0x000
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"CALL:FDDTEST:TFCINDICATOR 0x2DE"
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_call_fddtest.fm
CALL:FDDTest
195