Agilent Technologies 8960 Series Reference Manual page 208
Hide thumbs
Also See for 8960 Series:
- Reference manual (786 pages) ,
- Operation manual (165 pages) ,
- Manual operation (91 pages)
Table of Contents
Advertisement
CALL:STATus
CALL:STATus[:STATe]?
Function
Queries the status of the call. Status can be connected, idle, paging, registering, releasing, or
setup.
Query
Range: CONN|IDLE|PAG|REG|REL|SREQ
Only IDLE is returned in FDD Test operating mode.
*RST Setting
IDLE
Requirements
Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"CALL:STATUS?" !Returns the current call processing state.
CALL:STATus:AICHannel[:LEVel]?
Function
Queries the current level of the acquisition indicator channel. This setting is not used in FDD
Test operating mode.
Query
Range: -20.00 to 0 dB, 9.91 E+37
Resolution: 0.01 dB
*RST Setting
9.91 E+37
Requirements
Test Application Revision: (future release with Active Cell operating mode)
Programming Example
OUTPUT 714;"CALL:STATUS:AICHANNEL:LEVEL?"
CALL:STATus:AICHannel:STATe?
Function
Queries the current state of the acquisition indicator channel. This setting is not used in FDD
Test operating mode.
Query
Range: 0|1
*RST Setting
0 (off)
Requirements
Test Application Revision: (future release with Active Cell operating mode)
Programming Example
OUTPUT 714;"CALL:STATUS:AICHANNEL:STATE?"
208
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_call_status.fm
Advertisement
Table of Contents
Troubleshooting
