Related Topics - Agilent Technologies 8960 Series Reference Manual

SYSTem:COMMunicate:LAN[:SELF]:SMASk
Function Sets/queries the subnet mask of the test set based on the LAN IP address selected. The subnet
mask changes according to the value of A used for the LAN IP address.
If A is less than or equal to 127, the subnet mask is 255.0.0.0.
If A is greater than 127 and less or equal to 191, the subnet mask is 222.255.0.0.
If A is grater than 191, the subnet mask is 255.255.255.0.
If the LAN address is changed the subnet mask should be checked to insure that it is set to the
proper class for that LAN address.
Setting Range: 15 characters formatted as follows: A.B.C.D where A,B,C,D are between = 0 to 255 (no
embedded spaces)
Query Range: 15 characters formatted as follows: A.B.C.D where A,B,C,D are between = 0 to 255 (no
embedded spaces)
Factory 0.0.0.0 (this parameter is not affected by any reset operation and can only be changed by direct
setting user access)
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SYSTEM:COMMUNICATE:LAN:SELF:SMASK '255.2.6.200'"

Related Topics

"Configuring the Test Set's GPIB" on page 504
"Configuring the Test Set's LAN" on page 502
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_system_communicate.fm
SYSTem:COMMunicate
391