Agilent Technologies 8960 Series Reference Manual page 218

CALL:UPLink
CALL:UPLink:DPCHannel:SCODe
Function Sets/queries the uplink dedicated physical channel's scrambling code.
This setting cannot be changed while the active cell operating mode. Attempting to change this
setting while in this mode will result in the following error message: "Command Rejected While
in Active Cell Mode."
Setting Range: 0 to 38399
Query Range: 0 to 38399
*RST Setting 1
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"CALL:CELL:SCODE 10" !Sets the uplink DPCH scrambling code to 10.
218
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_call_uplink.fm