Agilent Technologies 8960 Series Reference Manual page 315

SETup:WWQuality:TIMeout:TIME
Function Sets/queries the waveform quality measurement's timeout setting to be used when the timeout
state is set to ON.
Setting Range: 1 to 999 seconds
Resolution: 1 second
Query Range: 1 to 999
*RST Setting 10 seconds
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WWQUALITY:TIMEOUT:TIME 5S"
SETup:WWQuality:TSLot
Function Selects which one of the 15 timeslots found in the frame to make measurements on. The
measurement interval is defined to be 1 timeslot long.
Setting Range: 0 to 16
Resolution: 1
Query Range: 0 to 14
*RST Setting 1
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WWQUALITY:TSLOT 10"
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_setup_wwquality.fm
SETup:WWQuality
315