Agilent Technologies 8960 Series Reference Manual page 395

SYSTem:CORRection:FREQuency
Function Sets/queries up to 20 comma-separated frequency values in MHz. Each frequency value
corresponds with a gain setting. See
The units, (GHz, MHz, kHz, Hz) are optional. If no units are specified, units default to Hz.
See "Amplitude Offset" on page
Sending a null list (no values) sets the state of all frequencies to Off.
Setting Range: 0 to 20 comma separated values ranging from 292.5 MHz to 2700 MHz
Resolution: 1 Hz
Query Range: 1 to 20 comma separated values ranging from 292.5 MHz to 2700 MHz, and NAN
(9.91E+37)
Resolution: 1 HZ
Factory 1. 800.00 MHz Off
Setting 2. 810.00 MHz Off
3. 820.00 MHz Off
4. 830.00 MHz Off
5. 840.00 MHz Off
6. 850.00 MHz Off
7. 860.00 MHz Off
8. 870.00 MHz Off
9. 880.00 MHz Off
10. 890.00 MHz Off
11. 900.00 MHz Off
12. 910.00 MHz Off
13. 920.00 MHz Off
14. 930.00 MHz Off
15. 940.00 MHz Off
16. 950.00 MHz Off
17. 960.00 MHz Off
18. 970.00 MHz Off
19. 980.00 MHz Off
20. 990.00 MHz Off
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SYSTEM:CORRECTION:FREQUENCY 1784.8 MHZ,1879.8 MHZ"
!Sets up to 20 comma separated frequencies
OUTPUT 714;"SYSTEM:CORRECTION:FREQUENCY"
!Sets the state for all frequencies and offsets to Off
"SYSTem:CORRection:GAIN"
47.
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_system_correction.fm
SYSTem:CORRection
.
395