CALibration
CALibration
"Diagram Conventions" on page 168
CALibration:MEASurements?
Function
Starts the channel power calibration routine. This calibration is used for the channel power and
the adjacent channel leakage ratio measurements.
It is important that no power is applied to the RF IN/OUT connector during calibration.
Although this command appears to be a query, it performs an immediate action when sent: no
information is returned.
Requirements
Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"CALIBRATION:MEASUREMENTS?" !Starts the measurement calibration.
:MEASurements?
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_calibration.fm
CALibration
179