Agilent Technologies 8960 Series Reference Manual page 183

Hide thumbs Also See for 8960 Series:
Table of Contents

Advertisement

CALL:AWGNoise:POWer:AMPLitude
Function
Sets/queries the additive white gaussian noise (AWGN) level.
AWGN and cell power (see
total forward channel RF output power. Depending on the cell power setting, an AWGN level may
be within the range listed below but cause an error message to be displayed. Possible causes are:
• Sum of AWGN and cell power causing total RF power limits to be exceeded (see
"CALL:TOTal:POWer"
• Greater than 10 dB difference between cell power and AWGN.
• Amplitude offset causing total RF power limits to be exceeded (see
set or query the amplitude offset value).
Setting
Range: -120 dBm/3.84 MHz to -15 dBm/3.84 MHz, NAN
Resolution: 0.01 dB
Query
Range: -120 dBm/3.84 MHz to -15 dBm/3.84 MHz, NAN
Resolution: 0.01 dB
*RST Setting
NAN
Programming Example
OUTPUT 714;"CALL:AWGNOISE:POWER:AMPLITUDE -30" !Set the AWGN level to -30 dBM/
CALL:AWGNoise:POWer:STATe
Function
Sets/queries the additive white gaussian noise (AWGN) state.
AWGN and cell power (see
total forward channel RF output power. Depending on the cell power setting, an AWGN level may
be within the range listed below but cause an error message to be displayed. Possible causes are:
• Sum of AWGN and cell power causing total RF power limits to be exceeded (see
"CALL:TOTal:POWer"
• Greater than 10 dB difference between cell power and AWGN.
• Amplitude offset causing total RF power limits to be exceeded (see
set or query the amplitude offset value).
Setting
Range: 1|ON|0|OFF
Query
Range: 1|0
*RST Setting
OFF
Requirements
Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"CALL:AWGNOISE:POWER:STATE:SELECTED ON" !Turns on AWGN.
"CALL[:CELL]:POWer"
for range of total RF power.)
"CALL[:CELL]:POWer"
for range of total RF power.)
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_call_awgn.fm
) are absolute power levels and make up the
"SYSTem:CORRection"
3.84
) are absolute power levels and make up the
"SYSTem:CORRection"
CALL:AWGNoise:POWer
to
MHz.
to
183

Advertisement

Table of Contents
loading

Table of Contents