Agilent Technologies 8960 Series Reference Manual page 373

Bit Binary
Number Weighting
4 16
3 8
2 4
1 2
0 1
Program Example - STATus:QUEStionable:ERRors:WCDMA Condition Register Bit Assignment
OUTPUT 714;"STATUS:QUESTIONABLE:ERRORS:WCDMA:EVENT?" !Queries and clears the
OUTPUT 714;"STATUS:QUESTIONABLE:ERRORS:WCDMA:CONDITION?" !Queries and clears the
OUTPUT 714;"STATUS:QUESTIONABLE:ERRORS:WCDMA:ENABLE 1024" !Sets the Questionable
OUTPUT 714;"STATUS:QUESTIONABLE:ERRORS:WCDMA:NTRANSITION 2" !Sets the Questionable
OUTPUT 714;"STATUS:QUESTIONABLE:ERRORS:WCDMA:PTRANSITION 2" !Sets the Questionable
Condition
+400 Errors
+300 Errors
+200 Errors
+100 Errors
Extension Bit
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_status_questionable.fm
Description
The condition bit is pulsed to a 1 and immediately
back to 0 if an error in the +400 to +499 range
occurs. Query the Event Register to find out if one of
these errors occurred.
The condition bit is pulsed to a 1 and immediately
back to 0 if an error in the +300 to +399 range
occurs. After setting the Positive Transition Filter
and the Negative Transition Filter you can query
the Event Register to find out which of these errors
occurred.
The condition bit is pulsed to a 1 and immediately
back to 0 if an error in the +200 to +299 range
occurs. After setting the Positive Transition Filter
and the Negative Transition Filter you can query
the Event Register to find out which of these errors
occurred.
The condition bit is pulsed to a 1 and immediately
back to 0 if an error in the +100 to +199 range
occurs. After setting the Positive Transition Filter
and the Negative Transition Filter you can query
the Event Register to find out which of these errors
occurred.
This bit is always 0.
!Questionable Errors
!WCDMA Event Register
!Qestionable Errors
!WCDMA Condition Register
!Errors WCDMA Enable
!Register for bit 10
!Errors WCDMA Negative
!Transition Filter
!Register for bit 1
!Errors WCDMA Positive
!Transition Filter
!Register for bit 1
STATus:QUEStionable
373