Agilent Technologies 8960 Series Reference Manual page 466

-300 through -399 Error Message Descriptions
Error Message
-360 Communication error
-361 Parity error in program message
-362 Framing error in program message
-363 Input buffer overrun
466
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_ts_err_msg_neg300.fm
Description
This is the generic communication error for devices
that cannot detect the more specific errors described
for error -361 through -363.
Parity bit not correct when data received for example,
on a serial port.
A stop bit was not detected when data was received for
example, on a serial port (for example, a baud rate
mismatch).
Software or hardware input buffer on serial port
overflows with data caused by improper or nonexistent
pacing.