Agilent Technologies 8960 Series Reference Manual page 385

SYSTem:APPLication:FORMat:LICense? '<format name>'
Function Queries the test set for the license status of the fast switching test application.
The returned values are:
• LIC indicates this is a licensed test application.
• NLIC indicates this is not a licensed test application.
• PART indicates that only part of the test application with multiple formats is licensed.
• UNKN indicates that license status is unknown.
Query Range: LIC|NLIC|PART|UNKN
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SYSTEM:APPLICATION:FORMAT:LICENSE? 'AMPS/136'"
SYSTem:APPLication:SELect[:NAME] '<test application name>'
Function Selects a test application and reboots the test set. This will switch the test application to the
revision already selected. There is no need to re-select the revision before switching. The reboot
process takes about 1 minute.
Queries the test set for the test application that is selected and will run after the next reboot of
the test set.
The test application name must be entered as it appears in the test application Setup menu, with
the exception that the string is not case sensitive and can be entered in any combination of upper
and lower case letters.
NOTE
Setting Range: See
Query Range: See
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SYSTEM:APPLICATION:SELECT:NAME 'AMPS/136 MOBILE TEST'"
OUTPUT 714;"SYSTEM:APPLICATION:SELECT:NAME?"
Selecting the correct name and the desired revision of a test application is
important. This information should be reviewed before proceeding. The directions
for how to determine test application name and revision are found in this
document.
"SYSTem:APPLication:CATalog[:NAME]?"
"SYSTem:APPLication:CATalog[:NAME]?"
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_system_application.fm
.
and null string.
SYSTem:APPLication
385