Call[:Cell]:Rfgenerator - Agilent Technologies 8960 Series Reference Manual

CALL[:CELL]:RFGenerator

CALL
[:CELL]
"Diagram Conventions" on page 168
CALL[:CELL]:RFGenerator:FREQuency
Function Sets/queries the RF generator downlink channel frequency. If no units are specified the setting
defaults to Hz.
The test set will tune to the frequency entered using this command when the
"CALL[:CELL]:CONTrol:DOWNlink:FREQuency:AUTO"
Setting Range: 292 MHz to 2700 MHz
Resolution: 0.1 Hz
Query Range: 292 MHz to 2700 MHz
Resolution: 0.1 Hz
*RST Setting 851 MHz
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"CALL:CELL:RFGENERATOR:FREQUENCY 450 MHZ"
!Sets the downlink channel frequency to 450 MHz.
:RFGenerator
:FREQuency
<sp><num value>[HZ|KHZ|MHZ|GHZ]
? (returns num value)
command is set to manual.
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_call_RFGEN.fm
CALL[:CELL]:RFGenerator
204