Agilent Technologies 8960 Series Reference Manual page 442

Hide thumbs Also See for 8960 Series:

Table of Contents

Printing Screens

Restart Windows

Depending on your LAN network adapter, your computer may or may not apply the network configuration

changes as they are made. It is import that you restart Windows NOW to make sure new LAN settings are in

effect when you try to connect to the test set.

Changing the LAN Settings on Your Test Set 1.Press the

the current LAN settings.

2. Press the

(Instrument Setup) key.

Changing the LAN IP Address may alter the Subnet Mask setting. Therefore, change the LAN IP

Address first, then change the Subnet Mask. Also, The last entry in the IP Address must not be

3. Turn the knob to highlight the setting you want to change.

4. Press the knob to select the setting.

5. Enter the new value using the keypad, and press the knob to complete the setting.

6. Turn the test set off and back on to start using the new settings.

S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_gen_print_screen.fm

key on the test set to display

SYSTEM CONFIG

Troubleshooting