+700 Through +799 Error Message Descriptions; Description - Agilent Technologies 8960 Series Reference Manual

+700 through +799 Error Message Descriptions

Description

A device-specific error indicates that the instrument has detected an error that occurred because some
operations did not properly complete, possibly due to an abnormal hardware or firmware condition. For
example, an attempt by the user to set an out of range value will generate a device specific error.
When one of these errors is generated, the +700 errors bit in the questionable error status register is set.
Table 11. FDD System Measurement Errors
+701 FDD measurement failure; Thermal Power hardware is
not responding
+702 FDD measurement failure; Adjacent Channel Leakage
Ratio hardware is not responding
+703 FDD measurement failure; Waveform Quality hardware
is not responding
+704 FDD measurement failure; Average Power hardware is
not responding
+705 FDD measurement failure; Loopback Bit Error Ratio
hardware is not responding
Error Message
A hardware failure associated with this measurement
is suspected. Rerun the measurement to verify this
error.
A hardware failure associated with this measurement
is suspected. Rerun the measurement to verify this
error.
A hardware failure associated with this measurement
is suspected. Rerun the measurement to verify this
error.
A hardware failure associated with this measurement
is suspected. Rerun the measurement to verify this
error.
A hardware failure associated with this measurement
is suspected. Rerun the measurement to verify this
error.
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_ts_err_msg_pos700.fm
+700 through +799 Error Message Descriptions
Description
484