Status:preset - Agilent Technologies 8960 Series Reference Manual

STATus:PRESet

STATus :PRESet
"Diagram Conventions" on page 168
STATus:PRESet
Function Presets the status subsystem.
Presetting the status subsystem performs the following functions:
• All enable registers are set to 0 (not enabled)
• All Positive Transition Registers (PTR's) are set to 1 (positive transitions enabled).
• All Negative Transition Registers (NTR's) are set to 0 (negative transitions disabled).
Requirements Test Application Revision: A.02.00 and above
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_status_preset.fm
STATus:PRESet
343