Call:pichannel - Agilent Technologies 8960 Series Reference Manual

CALL:PICHannel

CALL :PICHannel
"Diagram Conventions" on page 168
CALL:PICHannel:CCODe
Function Sets/queries the page indicator channel's channelization code.
This setting cannot be changed while in active cell operating mode (when available). Attempting
to change this setting while in this mode results in the following error message: "Command
Rejected While in Active Cell Mode."
Setting Range: CODE14|CODE15|CODE16|CODE17
Query Range: CODE14|CODE15|CODE16|CODE17
*RST Setting CODE16
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"CALL:PICHANNEL:CCODE CODE10"
CALL:PICHannel:DATA
Function Sets/queries the page indicator channel data being sent on the downlink. You can send either all
ones or all zeros.
Setting Range: ZERos|ONES
Query Range: ZER|ONES
*RST Setting ZERos
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"CALL:PICHANNEL:DATA ONES" !Sends all ones for the paging indicator channel data.
:CCODe
<sp>CODE14|CODE15|CODE16|CODE17
? (returns CODE14|CODE15|CODE16|CODE17)
:DATA
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_call_pichannel.fm
<sp>ZERos|ONES
? (returns ZER|ONES
CALL:PICHannel
200