Agilent Technologies 8960 Series Reference Manual page 325

STATus:OPERation Register Bit Assignments
The OPERation status register set contains bits which give an indication of conditions that are part of the test
set's normal operation.
Bit Binary
Number Weighting
15 32768
14 16384
13 8192
12 4096
11 2048
10 1024
9 512
8 256
7 128
6 64
5 32
4 16
3 8
2 4
1 2
0 1
Program Examples - STATus:OPERation
OUTPUT 714;"STATUS:OPERATION:EVENT?" !Queries the Operation Event Register.
OUTPUT 714;"STATUS:OPERATION:CONDITION?" !Queries the Operation Condition Register.
OUTPUT 714;"STATUS:OPERATION:ENABLE 1024" !Sets the Operation Enable Register for bit 10.
OUTPUT 714;"STATUS:OPERATION:NTR 1024" !Sets the Operation Negative Transition
OUTPUT 714;"STATUS:OPERATION:PTR 512" !Sets the Operation Event Positive Transition
Condition
Not Used. Defined by SCPI.
Reserved for future use.
Reserved for future use.
SYSTem:SYNChronized
Reserved for future use
CALL Summary
NMRReady (New Measurement
Result Ready) Summary
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Extension Bit
!Register for bit 10.
!Register for bit 9.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This condition bit is "pulsed" by the
SYSTem:SYNChronized command. This will allow
the status system to indicate that the input buffer is
synchronized to the point where this command is
parsed and that all prior sequential commands are
completed and all prior overlapped commands have
started.
This bit is always 0.
This bit is the summary message bit for the
STATus:OPERation:CALL register.
This bit is the summary message bit for the
STATus:OPERation:NMRReady register.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_status_operation.fm
STATus:OPERation:
Description
325