Agilent Technologies 8960 Series Reference Manual page 299

SETup:WACLeakage:TRIGger:SOURce
Function Sets/queries the adjacent channel leakage measurement's trigger source.
Setting Range: IMMediate|PROTocol|AUTO
Query Range: IMM|PROT|AUTO
*RST Setting AUTO
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WACLEAKAGE:TRIGGER:SOURCE IMMEDIATE"
SETup:WACLeakage:UPPer[1]:STATe
Function Sets/queries the 1st upper adjacent channel's state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 1 (on)
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WACLEAKAGE:UPP1:STATE 0
SETup:WACLeakage:UPPer2:STATe
Function Sets/queries the 2nd upper adjacent channel's state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 1 (on)
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WACLEAKAGE:UPP2:STATE 0
" !Turns off the upper 1st adjacent channel.
" !Turns off the upper 2nd adjacent channel.
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_setup_wacleakage.fm
SETup:WACLeakage
299