Agilent Technologies 8960 Series Reference Manual page 296

SETup:WACLeakage
SETup:WACLeakage:COUNt:NUMBer
Function Sets/queries the number of adjacent channel leakage measurements to be made when the
multi-measurement state is ON.
Setting Range: 1 to 999
Query Range: 1 to 999
*RST Setting 10
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WACLEAKAGE:COUNT:NUMBER 5"
!Sets the number of adjacent channel leakage multi-measurements to 5.
SETup:WACLeakage:COUNt:STATe
Function Sets/queries the adjacent channel leakage multi-measurement state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WACLEAKAGE:COUNT:STATE ON" !Turns on adjacent channel leakage
multi-measurements.
SETup:WACLeakage:LOWer[1]:STATe
Function Sets/queries the 1st lower adjacent channel's state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 1 (on)
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WACLEAKAGE:LOW1:STATE 0
296
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_setup_wacleakage.fm
" !Turns off the lower 1st adjacent channel.