Agilent Technologies 8960 Series Reference Manual page 398

SYSTem:CORRection
SYSTem:CORRection:STATe
Function Sets/queries the RF IN/OUT Amplitude Offset State. The state must be On before any of the
offsets are active regardless of the state for any of the frequencies or offsets.
When the RF IN/OUT Amplitude Offset State is On, the Instrument Status Area will indicate
"Offset" regardless of the state for any of the frequencies or offsets.
Setting any of the frequency or offset states to On will set the RF IN/OUT Amplitude Offset State
to On.
See "Amplitude Offset" on page
Setting 0|OFF | 1|ON
Query 0|1
Factory 0 (off)
Setting
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SYSTEM:CORRECTION:STATE ON" !Sets the RF IN/OUT
398
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_system_correction.fm
47.
!Amplitude Offset State to On