Agilent Technologies 8960 Series Reference Manual page 297

SETup:WACLeakage:LOWer2:STATe
Function Sets/queries the 2nd lower adjacent channel's state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 1 (on)
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WACLEAKAGE:LOW2:STATE 0
SETup:WACLeakage:TIMeout[:STIMe]
Function The setting form of this command performs two functions: (1) sets the adjacent channel leakage
measurement's timeout (see
leakage measurement's timeout STATe to 1 (on).
The query form returns the adjacent channel leakage measurement's timeout value.
Setting Range: 0.1 to 999.9 seconds
Resolution: 0.1 second
Query Range: 0.1 to 999.9
*RST Setting 10 seconds, on
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WACLEAKAGE:TIMEOUT:STIME 5 S"
!Sets timeout state to ON and sets the timeout time to 5 seconds.
" !Turns off the lower 2nd adjacent channel.
"Measurement Timeouts"
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_setup_wacleakage.fm
) value, and (2) sets the adjacent channel
SETup:WACLeakage
297