Automatic Measurements; Data Logger; Quick Help - Agilent Technologies U1604A Quick Start Manual

Automatic Measurements

The following automatic measurements can be accessed by pressing the
Measure button. Up to four measurement menus with 22 measurement
options can be selected by turning rotary switch. You can activate the indi-
vidual softkey and press the rotary switch to set the measurement type.
Table 7 List of automatic measurement options
Time
Measurements
• +Duty
• –Duty
• Frequency
• Period
• Rise Time
• Fall Time
• +Width
• –Width

Data Logger

The data logger acts as a recorder to log and plot input signal trend. This
function is applicable to voltmeter, ohmmeter and auxiliary meter
measurements. Refer to Table 3 for measurement functions of each meter.

Quick Help

The U1600A Series includes built- in Quick Help support. To view the
quick help for each function or subfunction, press the Help button. You
can turn the rotary switch clockwise to go to the next page. Press the
Help button again to exit the Quick Help. Quick Help in other languages
are available in the accompanying product reference CD and need to be
installed prior to usage. To view the installed Quick Help language, enter
Utility mode in the User menu and press F2 on page 1/4 for language
selection.
Refer to U1602A and U1604A User's and Service Guide for more detailed information of the
product. All product documentation and software are included in the product reference
CD-ROM.
Voltage
Measurements
• Mean
• Cycle Mean
• Amplitude
• Base
• Maximum
• Minimum
• Peak- to- Peak
• RMS
• Top
Phase and Delay
• Phase
• Delay
14
Preshoot and
Overshoot
• Preshoot
• +Overshoot
• –Overshoot