Agilent Technologies 8960 Series Reference Manual page 384

SYSTem:APPLication
SYSTem:APPLication:CATalog:REVision:COUNt? '<test application name>'
Function Query the test set for the number of revisions present on the hard disk for a specified test
application. Up to 30 revisions can be stored for a test application.
The test application name must be entered as it appears in the test application Setup menu, with
the exception that the string is not case sensitive and can be entered in any combination of upper
and lower case letters.
Query Range: 0 through 30
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SYSTEM:APPLICATION:CATALOG:REVISION:COUNT? 'AMPS/136 MOBILE TEST'"
SYSTem:APPLication:FORMat[:NAME]
Function Switches formats in a fast switching test application. A licensed fast switching test application
must be selected to use this command.
Queries the test set for the name of the currently active format. This string is not case sensitive.
Setting Range:
• 'GSM'
• 'AMPS/136'
• 'GPRS'
• 'IS-2000/IS-95/AMPS'
• 'WCDMA'
Query Range: A string up to 25 characters, or the null string.
• "GSM"
• "AMPS/136"
• "GPRS"
• "IS-2000/IS-95/AMPS"
• "WCDMA"
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SYSTEM:APPLICATION:FORMAT:NAME 'AMPS/136'"
OUTPUT 714;"SYSTEM:APPLICATION:FORMAT:NAME?"
384
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_system_application.fm