Fetch:wberror - Agilent Technologies 8960 Series Reference Manual

FETCh:WBERror

FETCh :WBERror
"Diagram Conventions" on page 168
FETCh:WBERror[:ALL]?
Function Queries a loopback bit error measurement result.
Measurement results are returned in the following order: integrity, bit error ratio, bit error
count, bits tested.
Query Range
• Integrity: 1 to 23
• Bit Error Ratio: 0 to 99%, 9.91 E+37
• Bit Error Count: 0 to 999999, 9.91 E+37
• Bits Tested: 0 to 999999, 9.91 E+37
Resolution
• Integrity: 1
• Bit Error Ratio: 0.0001 dB
• Bit Error Count: 1
• Bits Tested: 1
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"FETCH:WBERROR:ALL?"
[:ALL]
:BITS?
:COUNt?
:ICOunt?
:INTegrity?
:RATio?
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_fetch_wberror.fm
? (returns Integrity, Bit Error Ratio
Bit Error Count, Bits Tested)
(returns Bits Tested)
(returns Bit Error Count)
(returns Intermediate Count)
(returns Integrity)
(returns Integrity)
FETCh:WBERror
236