Agilent Technologies 8960 Series Reference Manual page 198

CALL:OCNSource
CALL:OCNSource:STATe?
Function Queries the on/off state of the calculated UTRA FDD composite orthogonal channel noise
simulator (OCNS).
The OCNS level is a calculated value used to balance the relative power levels of the following
channels to sum to 100%:
• OCNS
• Common Pilot Channel (CPICH)
• Primary Common Control Physical Channel (P-CCPCH
• Synchronization Channel (SCH)
• Page Indicator Channel (PICH)
• Dedicated Physical Channel (DPCH)
If the contribution of OCNS is calculated to be -30 dB or less, the OCNS state is turned off.
Setting Range: 1|0
*RST Setting 0 (off)
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"CALL:OCNSOURCE:STATE?"
198
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_call_ocnsource.fm