Agilent Technologies 8960 Series Reference Manual page 302

SETup:WBERror
SETup:WBERror:TIMeout:STATe
Function Sets/queries the loopback bit error ratio measurement's timeout state (see
Timeouts"
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WBERROR:TIMEOUT:STATE ON"
SETup:WBERror:TIMeout:TIME
Function Sets/queries loopback bit error ratio measurement's timeout setting to be used when the timeout
state is set to ON (see
Setting Range: 0.1 to 999.9 seconds
Resolution: 0.1 second
Query Range: 0.1 to 999.9
*RST Setting 20 seconds
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WBERROR:TIMEOUT:TIME 5 S"
302
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_setup_wberror.fm
).
"Measurement Timeouts" ) .
"Measurement