Agilent Technologies 8960 Series Reference Manual page 290

SETup:AFANalyzer
SETup:AFANalyzer:EXPandor:STATe
Function Sets/queries whether the expandor is enabled.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST setting 0 (off)
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:AFANALYZER:EXPANDOR:STATE ON"
SETup:AFANalyzer:FILTer[:TYPE]
Function Sets/queries the filter type for audio measurements. Filter choices are as follows: 100 Hz tunable
bandpass filter (TBP), C-message filter (CMES), 50 Hz to 15 kHz bandpass filter (BPAS50), 300
Hz to 15 kHz bandpass filter (BPAS300).
Setting Range: NONE|TBPass|CMESsage|BPASs50|BPASs300
Query Range: NONE|TBP|CMES|BPAS50|BPAS300
*RST setting NONE
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:AFANALYZER:FILTER:TYPE BPASS50"
!Selects the 50 Hz to 15 kHz bandpass filter.
SETup:AFANalyzer:FILTer:TBPass[:FREQuency]
Function Sets/queries the center frequency for the 100 Hz tunable bandpass filter (TBPass).
Setting Range: 300.0 to 20000 Hz
Resolution: 0.1
Query Range: 300.0 to 20000 Hz
*RST setting 1000
Requirements Test Application Revision: A.02.00 and above
Programming Example
10 OUTPUT 714;"SETUP:AFANALYZER:FILTER:TBPASS:FREQUENCY 300HZ"
290
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_setup_afan.fm