Agilent Technologies 8960 Series Reference Manual page 279

RFANalyzer:MANual:MEASurement[:MFRequency]
Function The setting form of this command performs two functions: (1) sets the Meas Frequency of the test
set's measurement signal path, and (2) selects manual (auto off) tune mode for the test set's
measurement signal path. (See
The query form of this command returns the tune frequency of the test set's measurement signal
path.
The tune mode for the test set's measurement signal path can be returned to auto using the
"RFANalyzer:CONTrol:MEASurement:FREQuency:AUTO"
Setting Range: 292.5 MHz to 2700 MHz
Resolution: 0.1 Hz
Query Range: 292.5 MHz to 2700 MHz
*RST setting 896 MHz
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"RFANALYZER:MANUAL:MEASUREMENT:MFREQUENCY 942.6 MHZ"
!Enables manual control of the measurement signal path tune frequency and sets the tune frequency
to 942.6 MHz.
RFANalyzer:MANual:MEASurement:FREQuency
Function Sets/queries Meas Frequency, the measurement downconverter signal path frequency control
mode. (See
This setting is applied when manual mode is selected (see
"RFANalyzer:CONTrol:MEASurement:FREQuency:AUTO"
Setting Range: 292.5 MHz to 2700 MHz
Resolution: 0.1 Hz
Query Range: 292.5 MHz to 2700 MHz
*RST setting 896 MHz
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"RFANALYZER:MANUAL:MEASUREMENT:FREQUENCY 942.6 MHZ"
!Sets the measurement signal path tune frequency to 942.6 MHz when manual control mode is used.
"Block Diagram"
"Block Diagram" .)
.)
command.
).
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_rfanalyzer.fm
RFANalyzer
279