Agilent Technologies 8960 Series Reference Manual page 244

FETCh:WTPower
FETCh:WTPower[:ALL]?
Function Queries a thermal power measurement result.
This query returns an integrity indicator followed by a thermal power measurement result (if
results are available).
If the multi-measurement state is on, the result represents the average of a number of thermal
power measurements. Multi-measurement state, by default, is off. To set up
multi-measurements, see
Query • Range: -99 to 99 dBm, 9.91 E+37
• Resolution: 0.01 dB
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"FETCH:WTPOWER:ALL?" !Returns integrity, thermal power.
FETCh:WTPower:ICOunt?
Function Queries the intermediate count of measurements completed in a multi-measurement.
The multi-measurement state, by default, is off. To set up multi-measurements, see
"SETup:WTPower:COUNt[:SNUMber]"
Query Range: 0 to 999
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"FETCH:WTPOWER:ICOUNT?"
FETCh:WTPower:INTegrity?
Function Queries the measurement integrity indicator for the last thermal power measurement completed.
Zero indicates a normal measurement. See
about non-zero integrity results.
Query Range: 1 through 16
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"FETCH:WTPOWER:INTegrity?"
!Queries the inegrity indicator for the thermal power results.
244
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_fetch_wtpower.fm
"SETup:WTPower:COUNt[:SNUMber]"
"Integrity Indicator" on page 153
.
for information