Agilent Technologies 8960 Series Reference Manual page 314

SETup:WWQuality
SETup:WWQuality:COUNt:STATe
Function Sets/queries the multi-measurement state of the waveform quality measurement.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WWQUALITY:COUNT:STATE ON" !Turns on multi-measurements.
SETup:WWQuality:TIMeout[:STIMe]
Function The setting form of this command performs two functions: (1) sets the waveform quality
measurement's timeout value, and (2) sets the waveform quality measurement's timeout STATe
to 1 (on).
The query form returns the waveform quality measurement's timeout value.
Setting Range: 1 to 999 seconds
Resolution: 1 second
Query Range: 1 to 999
*RST Setting 10 seconds, on
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WWQUALITY:TIMEOUT:STIME 5S"
!Sets timeout state to ON and sets the timeout time to 5 seconds.
SETup:WWQuality:TIMeout:STATe
Function Sets/queries the waveform quality measurement's timeout state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SETUP:WWQUALITY:TIMEOUT:STATE ON"
314
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_setup_wwquality.fm