Agilent Technologies 8960 Series Reference Manual page 222

DISPlay
DISPlay:WINDow:ERRor:CLEar
Function Clears the error message from the display screen but not from the Message Log.
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"DISPLAY:WINDOW:ERROR:CLEAR" !Clears an error message from the display.
DISPlay:OPERator:MESSage
Function Allows the operator to enter up to four messages, each up to 30 characters in length. These
messages will be printed to the display when the command is sent and
FAST.
Setting 1|2 |3|4
1=uppermost field, 4=lowermost field
Factory Each message is initialized to a null string. Nothing will be displayed until one or more of the
setting four GPIB messages is sent to the test set.
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"DISP:OPER:MESS1'Press F6 to stop test'"
!Writes the message "Press F6 to stop test" to the uppermost display field.
222
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_display.fm
"DISPlay:MODE" is set to