Agilent Technologies 8960 Series Reference Manual page 245

FETCh:WTPower:POWer[:AVERage]?
Function Queries the average of the results of several thermal power measurements. To set the number of
measurement to average, use the command
Query • Range: -99 to 99 dBm, 9.91 E+37
• Resolution: 0.01 dB
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"FETCH:WTPOWER:POWER:AVERAGE?"
!Queries the thermal power for the thermal power results.
FETCh:WTPower:POWer:ALL?
Function Queries the statistical measurement results for several thermal power measurements.
To set the number of measurements to gather statistics for, use the command
"SETup:WTPower:COUNt[:SNUMber]" on page
Results are returned in the following order: minimum, maximum, average, and standard
deviation thermal power.
Query • Range: -99 to 99 dBm, 9.91 E+37
• Resolution: 0.01 dB
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"FETCH:WTPOWER:POWER:ALL?"
!Queries the statistical measurement results for thermal power measurement.
FETCh:WTPower:POWer:MAXimum?
Function Queries the maximum power of several thermal power measurements. To set the number of
measurement to average, use the command
Query • Range: -99 to 99 dBm, 9.91 E+37
• Resolution: 0.01 dB
Requirements Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"FETCH:WTPOWER:POWER:MAXIMUM?"
!Queries the inegrity indicator for the thermal power results.
"SETup:WTPower:COUNt[:SNUMber]" on page
309.
"SETup:WTPower:COUNt[:SNUMber]" on page
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_fetch_wtpower.fm
FETCh:WTPower
309.
309..
245