SYSTem:TIME
SYSTem
"Diagram Conventions" on page 168
SYSTem:TIME
Function
Sets/queries the local time of day.
UTC time will track changes made directly to local time settings. Also, if new settings are made
to UTC time, local time will track UCT time.
Changes to time zone will cause changes to local time, but will not directly affect UTC time.
Setting
Range:
• <hour> 0 to 23
• <minute> 0 to 59
• <second> 0 to 59
NOTE
Query
Range:
• <hour> 0 to 23
• <minute> 0 to 59
• <second> 0 to 59
NOTE
*RST Setting
This feature is not affected by instrument preset
Requirements
Test Application Revision: A.02.00 and above
Programming Example
OUTPUT 714;"SYSTEM:TIME 7,30,0" !Sets local time to 7:30
OUTPUT 714;"SYSTEM:TIME?" !Returns "+7,+30,+0" if local time has been set to 7:30.
Related Topics
"SYSTem:UTC[:TIME]"
"SYSTem:TZONe"
:TIME
<sp><hour>,<minute>,<second>
? (returns <hour>, <minute>, <second>)
The resolution of local time setting is minutes. A number within the parameter
range must be entered for <second> but it will not affect the minute setting.
The resolution of the local time setting is minutes. The value returned for
<second> will not provide useful information.
S:\Hp8960\E1963A WCDMA\3.2 release\Reference Guide\Chapters\wcdma_hpib_system_time.fm
SYSTem:TIME
406