Accessing Lm Via Telnet; Accessing Lm Via Remote Modem Connection; Disconnecting A Current Lm User - Cabletron Systems TRBMIM User Manual

ACCESSING LOCAL MANAGEMENT

2.7.1 Accessing LM Via Telnet

Once the TRBMIM/TRBMIM-T is assigned an IP address, you can
access Local Management via Telnet connection from any TCP/IP based
node on the network. You establish the Telnet connection to LM by
specifying the TRBMIM/TRBMIM-T IP address in the Telnet
application. See the user instructions included with your Telnet
application for more information. See Section 4.1.2 for information on
setting an IP address for the TRBMIM/TRBMIM-T.

2.7.2 Accessing LM Via Remote Modem Connection

To access LM via modem connection:
1. Turn on the modem. The modem must be set for Auto Answer and
Data Carrier Detect must be active. Refer to your modem's user
manual for operating instructions.
2. Call the modem attached to the TRBMIM/TRBMIM-T.
The LM Password screen appears (see Figure 2-4) after you have
established the connection.

2.7.3 Disconnecting A Current LM User

If another user is currently logged on to LM when you try to access LM,
via direct or remote connection (including Telnet), the screen shown in
Figure 2-5 appears asking if you want to disconnect the other user so you
can access LM.
2-8