Forming Bgp Peer Routers - Lenovo Flex System Fabric CN4093 Application Manual

10gb converged scalable switch
Hide thumbs Also See for Flex System Fabric CN4093:
Table of Contents

Advertisement

Forming BGP Peer Routers

410
CN4093 Application Guide for N/OS 8.2
The iBGP peers have to maintain reciprocal sessions to every other iBGP router in 
the same AS (in a full‐mesh manner) in order to propagate route information 
throughout the AS. If the iBGP session shown between the two routers in AS 20 
was not present (as indicated in Figure
to AS 50, and the bottom router would not learn the route to AS 11, even though 
the two AS 20 routers are connected via the Flex System and the Application 
Switch.
Figure 42. iBGP and eBGP
AS 11
ISP A
eBGP
AS 50
ISP B
Typically, an AS has one or more border routers—peer routers that exchange routes 
with other ASs—and an internal routing scheme that enables routers in that AS to 
reach every other router and destination within that AS. When you advertise routes 
to border routers on other autonomous systems, you are effectively committing to 
carry data to the IPv4 space represented in the route being advertised. For 
example, if you advertise 192.204.4.0/24, you are declaring that if another router 
sends you data destined for any address in 192.204.4.0/24, you know how to carry 
that data to its destination.
Two BGP routers become peers or neighbors once you establish a TCP connection 
between them. For each new route, if a peer is interested in that route (for example, 
if a peer would like to receive your static routes and the new route is static), an 
update message is sent to that peer containing the new route. For each route 
removed from the route table, if the route has already been sent to a peer, an 
update message containing the route to withdraw is sent to that peer.
For each Internet host, you must be able to send a packet to that host, and that host 
has to have a path back to you. This means that whoever provides Internet 
connectivity to that host must have a path to you. Ultimately, this means that they 
must "hear a route" which covers the section of the IPv4 space you are using; 
otherwise, you will not have connectivity to the host in question.
42), the top router would not learn the route 
Internet
AS 20
iBGP
Application
Switch

Advertisement

Table of Contents
loading

Table of Contents