Chapter 19. Edge Virtual Bridging - Lenovo RackSwitch G8264CS Application Manual

Hide thumbs Also See for RackSwitch G8264CS:
Table of Contents

Advertisement

Chapter 19. Edge Virtual Bridging

© Copyright Lenovo 2017
The 802.1Qbg/Edge Virtual Bridging (EVB) is an emerging IEEE standard for 
allowing networks to become virtual machine (VM)‐aware. EVB bridges the gap 
between physical and virtual network resources. The IEEE 802.1Qbg simplifies 
network management by providing a standards‐based protocol that defines how 
virtual Ethernet bridges exchange configuration information. In EVB 
environments, physical end stations, containing multiple virtual end stations, use a 
bridge to form a LAN. The virtual NIC (vNIC) configuration information of a 
virtual machine is available to these EVB devices. This information is generally not 
available to an 802.1Q bridge.
Lenovo Enterprise Network Operating System EVB features are compliant with 
the IEEE 802.1Qbg Authors Group Draft 0.2. For a list of documents on this feature, 
see: http://www.ieee802.org/1/pages/802.1bg.html.
The RackSwitch G8264CS performs the role of a 802.1Qbg bridge in an EVB 
environment.
Enterprise NOS implementation of EVB supports the following protocols:
Virtual Ethernet Bridging (VEB) and Virtual Ethernet Port Aggregator (VEPA): 
VEB and VEPA are mechanisms for switching between VMs on the same 
hypervisor. VEB enables switching with the server, either in the software 
(vSwitch), or in the hardware (using single root I/O virtualization capable NICs). 
VEPA requires the edge switch to support "Reflective Relay"— an operation 
where the switch forwards a frame back to the port on which it arrived if the 
destination MAC address is on the same port.
Edge Control Protocol (ECP): ECP is a transport protocol that operates between 
two peers over an IEEE 802 LAN. ECP provides reliable, in‐order delivery of 
ULP (Upper Layer Protocol) PDUs (Protocol Data Units). 
Virtual Station Interface (VSI) Discovery and Configuration Protocol (VDP): 
VDP allows hypervisors to advertise VSIs to the physical network. This protocol 
also allows centralized configuration of network policies that will persist with 
the VM, independent of its location.
EVB Type‐Length‐Value (TLV): EVB TLV is a Link Layer Discovery protocol 
(LLDP)‐based TLV used to discover and configure VEPA, ECP, and VDP.
Chapter 19: Edge Virtual Bridging
347

Advertisement

Table of Contents
loading

Table of Contents