Ikev2 Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

IKEv2 Configuration
IKEv2 Preshare Key Configuration
© Copyright Lenovo 2017
The following table describes the commands used to configure IKEv2.
Table 304.
IKEv2 Options
Command Syntax and Usage
[no] ikev2 cookie
Enables or disables cookie notification.
Command mode: Global configuration
ikev2 retransmit­interval <1‐20>
Sets the interval, in seconds, the timeout value in case a packet is not received
by the peer and needs to be retransmitted.
The default value is 20 seconds.
Command mode: Global configuration
show ikev2
Displays the current IKEv2 settings.
Command mode: All
The following table describes the commands used to configure IKEv2 preshare
keys.
Table 305.
IKEv2 Preshare Key Options
Command Syntax and Usage
ikev2 preshare­key local <1‐256 characters>
Configures the local preshare key.
The default value is ibm123.
Command mode: Global configuration
ikev2 preshare­key remote <1‐256 characters> <IPv6 address>
Configures the remote preshare key for the IPv6 address.
Command mode: Global configuration
show ikev2 preshare­key
Displays the current IKEv2 Preshare key settings.
Command mode: Global configuration
Chapter 4: Configuration Commands
539