OSPFv3 Redistribute Entry Configuration
510
G8264CS Command Reference for ENOS 8.4
The following table describes the OSPFv3 Redistribute Entry commands.
Table 283.
OSPFv3 Redist Entry Configuration Options
Command Syntax and Usage
redistconfig <1‐128> address <IPv6 address> <IPv6 prefix length (1‐128)>
Configures the base IPv6 address and the subnet prefix length for the
redistribution entry.
Command mode: Router OSPF3
[no] redistconfig <1‐128> enable
Enables or disables the OSPFv3 redistribution entry.
Command mode: Router OSPF3
redistconfig <1‐128> metrictype {asExttype1|asExttype2}
Configures the metric type applied to the route before it is advertised into the
OSPFv3 domain.
Command mode: Router OSPF3
redistconfig <1‐128> metricvalue <1‐16777215>
Configures the route metric value applied to the route before it is advertised
into the OSPFv3 domain.
Command mode: Router OSPF3
redistconfig <1‐128> tag <0‐4294967295>
Configures the route tag.
Command mode: Router OSPF3
no redistconfig <1‐128> tag
Removes the route tag.
Command mode: Router OSPF3
no redistconfig <1‐128>
Deletes the OSPFv3 redistribution entry.
Command mode: Router OSPF3
show ipv6 ospf redistconfig <1‐128>
Displays the current OSPFv3 redistribution configuration for the specified
entry.
Command mode: All