OSPFv3 Summary Range Configuration
500
G8264CS Command Reference for ENOS 8.4
The following table describes the OSPFv3 Summary Range commands.
Table 276.
OSPFv3 Summary Range Configuration Options
Command Syntax and Usage
arearange <1‐16> address <IPv6 address> <prefix length (1‐128)>
Configures the base IPv6 address and subnet prefix length for the range.
Command mode: Router OSPF3
arearange <1‐16> area <area index (0‐2)>
Configures the area index used by the switch.
Command mode: Router OSPF3
[no] arearange <1‐16> enable
Enables or disables the OSPFv3 summary range.
Command mode: Router OSPF3
[no] arearange <1‐16> hide
Hides or shows the OSPFv3 summary range.
Command mode: Router OSPF3
arearange <1‐16> lsatype {summary|Type7}
Configures the LSA type, as follows:
Summary LSA
Type7 LSA
Command mode: Router OSPF3
arearange <1‐16> tag <0‐4294967295>
Configures the route tag.
Command mode: Router OSPF3
no arearange <1‐16>
Deletes the OSPFv3 summary range.
Command mode: Router OSPF3
show ipv6 ospf arearange
Displays the current OSPFv3 summary range.
Command mode: All