Ospf Route Redistribution Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

OSPF Route Redistribution Configuration
OSPF MD5 Key Configuration
494
G8264CS Command Reference for ENOS 8.4
The following table describes the OSPF Route Redistribution commands.
Table 272.
OSPF Route Redistribution Configuration Options
Command Syntax and Usage
[no] redistribute {fixed|static|rip|ebgp|ibgp} <1‐64>
Adds or removes selected routing map to the rmap list.
This option adds a route map to the route redistribution list. The routes of the
redistribution protocol matched by the route maps in the route redistribution
list will be redistributed.
Command mode: Router OSPF
redistribute {fixed|static|rip|ebgp|ibgp} export
<metric (1‐16777214)> <AS external metric type (1‐2)>
Exports the routes of this protocol as external OSPF AS‐external LSAs in which
the metric and metric type are specified.
Command mode: Router OSPF
no redistribute {fixed|static|rip|ebgp|ibgp} export
Stops exporting the routes of the protocol.
Command mode: Router OSPF
show ip ospf redistribute
Displays the current route map settings.
Command mode: All
The following table describes the OSPF MD5 Key commands.
Table 273.
OSPF MD5 Key Options
Command Syntax and Usage
message­digest­key <1‐255> md5­key <1‐16 characters>
Sets the authentication key for this OSPF packet.
Command mode: Router OSPF
no message­digest­key <1‐255>
Deletes the authentication key for this OSPF packet.
Command mode: Router OSPF
show ip ospf message­digest­key <1‐255>
Displays the current MD5 key configuration.
Command mode: All