Acl Metering Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

ACL Metering Configuration
© Copyright Lenovo 2017
These commands define the Access Control profile for the selected ACL.
Table 191.
ACL Metering Configuration Options
Command Syntax and Usage
access­control list <1‐256> meter action {drop|pass}
Configures the ACL Meter to either drop or pass out‐of‐profile traffic.
Command mode: Global configuration
access­control list <1‐256> meter committed­rate <64‐10000000>
Configures the committed rate, in kilobits per second. The committed rate
must be a multiple of 64.
Command mode: Global configuration
[no] access­control list <1‐256> meter enable
Enables or disables ACL Metering.
Command mode: Global configuration
access­control list <1‐256> meter maximum­burst­size <32‐4096>
Configures the maximum burst size, in kilobits. Enter one of the following
values for mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096.
Command mode: Global configuration
default access­control list <1‐256> meter
Sets the ACL meter configuration to its default values.
Command mode: Global configuration
no access­control list <1‐256> meter
Disables the selected ACL meter.
Command mode: Global configuration
show access­control list <1‐256> meter
Displays current ACL Metering parameters.
Command mode: All
Chapter 4: Configuration Commands
387